Purifying water

From Nomadwiki.org
Jump to: navigation, search

This is a recipe for Purifying water a type of food.


To avoid consumption of plastic bottles it is a good to be prepared to treat water from nature yourself.

While you may come across fresh, clear water many times on your travels, care must be taken to avoid becoming sick when drinking it. Microscopic bacteria is often found in fresh water stream and rivers, especially near civilization or agricultural areas (farms). Even slight contamination of a water source can leave you violently ill. Fortunately, there are multiple ways to treat suspected water.

Water can be unsuitable for drinking for another reason: When cities are too big and not well enough equipped, or water is not treated with enough chemicals to make it suitable for long travel. In this case bottled water is your only option... For short stays it is not really a problem.

Be careful that bottles are well sealed when bought in warm regions. Avoid ice put into drinks if you don't know how they are made. If the ice blocks of your Tequila Sunrise are made with bad water, you might end up with more than a hangover.



Ingredients

  • a good stove is "Aqua mira", either in a two part liquid or a small dissoluble pill. Liquid to treat 120 liters costs approx $10. However, this is not recommended for long-term use.
  • Water filters. Personal water filters have become commonplace among hikers to ensure that their water is safe to drink. For the average traveler, however, they may be bulky and expensive. You can get them quite cheap however: Life Straw, Sawyer Mini
  • * Chemical treatment. From simple household bleach, iodine, chlorine, or similar chemicals to two-part time-sensitive compounds, chemical purification can offer a small, light-weight and inexpensive option to ensure water purity. Many chemicals can leave water with a slight aftertaste, which can be removed by adding a small amount of lemon, tea leaves, powdered drink mix or similar flavoring. When using chemical compounds, it is important to follow manufacturer guidelines, as many of these chemicals are poisonous if misused.

Steps

There are several options to acquire potable water:

  • Boil the water for at least 10 minutes, even though 15 to 20 mintutes are recommanded to reduce the risks. This is one of the most surefire ways to purify water and includes roadside puddles, brown sludge from underground, radiator liquid. It tends to require lots of patience for sure and fuel (if you don't have a wood cooker).
  • Leave it exposed in the sun (with lemon juice) in a transparent bottle. According to some recent studies, leaving water exposed to sun should take 6 hours before being drinkable, and reduced to 30 minutes if adding lemon. Read this article.
  • A cheap way of filtering water, although much more time consuming than industry-made filters, is (pine) wood:
  1. Break off a branch from the nearest pine tree
  2. peel away the bark, and slowly pour lake water through the stick. The improvised filter should trap any bacteria, producing fresh, uncontaminated water, according to this paper.
  3. Use a soft bottle, make a cork out of wood fitting the hole of your bottle. The water will make the cork swell and be blocked in the hole.
  4. Put pressure on the bottle, the water will be filtered through the wooden cork, eliminating most of the bacteria. Pine trees seem to be one of the best to filter.